ideabehindit
Flight and space

How a jet engine works

A jet engine pushes a plane forward by throwing a lot of air backwards, fast. Engineers sum up how it does it in four words: suck, squeeze, bang, blow. This is a turbofan, the kind on almost every airliner.

The idea behind it

Push air backwards and you are pushed forwards, the same way a balloon flies when you let it go. A jet engine does this continuously: air comes in, is squeezed, has fuel burnt in it, and leaves much faster than it arrived.

The clever part is the turbine. The hot gas on its way out spins a set of blades, and that spin drives the fan and compressor at the front through a shaft. The engine powers itself once it is running.

Why the big fan

Moving a lot of air a little faster uses less fuel than moving a little air a lot faster. So modern engines send most of the air around the core with the fan, like a ducted propeller. In a big airliner engine, around ten times more air goes around the core than through it.

Military jets use a smaller fan and often an afterburner, which sprays extra fuel into the exhaust for a burst of thrust at a high fuel cost.

In more detail

An airliner engine swallows more than a tonne of air every second at take-off. The fan alone can be over three metres across, and its tips move faster than the speed of sound. Turbine blades sit in gas hotter than the metal's melting point; they survive because they are made from single crystals of special alloys, coated with ceramic, and cooled by air blown through tiny holes in them. A single engine can produce more than 400 kilonewtons of thrust, roughly the weight of 40 tonnes, and run for tens of thousands of hours between major overhauls.