The idea behind it
Pure silicon conducts poorly. Adding tiny amounts of other elements (doping) gives it either spare electrons (n-type) or a shortage of them (p-type). A MOSFET has two n-type islands, the source and the drain, in p-type silicon, so normally current cannot cross between them.
The gate sits above the gap, insulated by a layer of glass a few atoms thick. A positive voltage on the gate pulls electrons into a thin channel under it, and the gap starts to conduct. Take the voltage away and the channel vanishes.
Why it changed the world
- As a switch: on and off stand for 1 and 0. Groups of transistors make logic gates, and logic gates make processors and memory.
- As an amplifier: a small changing gate voltage makes a big copy of itself in the drain current. That is how a microphone signal becomes loud enough for a speaker.
- Size: the first transistor in 1947 was the size of a thumb. Transistors in a 2025 phone chip are measured in nanometres, and more than 15 billion fit on a chip the size of a fingernail.
In more detail
Transistors come in two main families. The MOSFET shown here is controlled by voltage and uses almost no power when it is fully off, which is why it is used in chips. The older bipolar transistor (BJT) is controlled by a small current into its base and is still common in amplifiers and power circuits. Chips today are made by printing patterns of light onto silicon wafers, layer by layer, with features thousands of times thinner than a human hair. Each new generation packs more transistors into the same space, making devices faster and more efficient.