The idea behind it
A sensor beside each wheel counts the teeth of a toothed ring as it turns, so the computer always knows every wheel's speed. If one wheel suddenly slows much faster than the car can, it is about to lock.
The computer then opens a valve that lets some brake fluid pressure off that wheel, waits for it to speed up, and closes the valve again. This cycle repeats up to 15 times a second until you stop or ease off the pedal.
Using it
- In an emergency, press the brake pedal hard and keep pressing. Do not pump it; ABS does that for you.
- A buzzing or pulsing pedal and a grinding noise are normal: that is ABS working.
- Keep steering around the obstacle while braking. That is the main benefit.
In more detail
ABS was first fitted to cars in the late 1970s and is now required on new cars in India, and on new motorcycles above 125 cc, with smaller bikes using combined braking that applies both wheels together. The same sensors and valves are used by traction control, which brakes a wheel that spins when pulling away, and by electronic stability control, which brakes individual wheels to stop a skid in a bend. On loose gravel or deep snow, a locked wheel can build up a wedge in front of it, so ABS stopping distances there can be slightly longer, but steering control is kept.