The idea behind it
The engine turns the ring gear. The ring gear carries a pair of small spider gears, and these mesh with a side gear on each wheel's axle. The spider gears are free to spin on their pins.
Going straight, both wheels push back equally, the spider gears stay still on their pins, and everything turns together. In a bend, the inner wheel is slowed, so the spider gears roll around it and speed up the outer wheel by exactly the same amount.
The rule it follows
The ring gear's speed is always the average of the two wheels. If one wheel slows by 30%, the other speeds up by 30%. That is why one stuck wheel can spin at double speed while the other stands still.
- Open differential: most cars; smooth, but loses grip if one wheel slips.
- Limited-slip: clutches or special gears send more force to the wheel that grips.
- Locking: off-road vehicles lock both wheels together when stuck.
In more detail
In a front-wheel-drive car the differential is built into the gearbox between the front wheels; in a rear-wheel-drive car it sits in the round bulge in the middle of the rear axle. Four-wheel-drive vehicles often have three: one for each axle and a centre one between front and rear. Its gears also slow the drive down, typically by about 3 to 4 times, to give the wheels more turning force. Electric cars with one motor per wheel need no differential at all: a computer simply runs each motor at the right speed.